set protocols vrrp interface vrid disable

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

The set protocols vrrp interface vrid disable command is used to enable or disable the VRRP function.

NOTE:

This command applies to both VRRPv2 and VRRPv3 configuration.


Command Syntax

set protocols vrrp interface <interface-name> vrid <virtual-router-id> disable <true | false>


Parameter

 

Parameter

Description

interface <interface-name>

Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string.

vrid <virtual-router-id>

Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254.

disable <true | false>

Enables or disables the VRRP function. The value is true or false.

  • true: disables the VRRP function.
  • false: enables the VRRP function.

By default, VRRP function is enabled.

     

Example

  •  Disable the VRRP function.      
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 disable true
admin@Xorplus# commit
  • Enable the VRRP function.
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 disable false
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.