set vlans vlan-id private-vlan association

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

The set vlans vlan-id private-vlan association command associates the secondary VLAN list with the primary VLAN.


Command Syntax

set vlans vlan-id <vlan-id> private-vlan association <secondary-vlan-list>


Parameter

Parameter

Description

vlan-id <vlan-id>

Specifies the primary VLAN ID. The value is an integer.

<secondary-vlan-list>

Specifies secondary VLAN list in a primary VLAN. The value is a string. E.g. 3, 5, 100-200.

The VLANs in the list need to be previously configured as either an isolated VLAN or a community VLAN.


Usage Guidelines

Configure the association between primary VLAN and secondary VLAN list to specify a PVLAN pair.

NOTE:

  • Before setting this command, use command set vlans vlan-id <vlan-id> private-vlan mode <primary | community | isolated> to configure the PLAN types.
  • A primary VLAN can be associated with multiple community VLANs and only one isolated VLAN.
  • A secondary VLAN (isolated or community) can be associated with only one primary VLAN.
  • If you run this command with the same primary VLAN multiple times, only the latest configuration takes effect.
  • Before modifying or deleting PVLAN association configuration, you need to delete all the PVLAN settings of the involved Private VLANs.


Example

  • Associate the secondary VLAN list 2-3 with the primary VLAN 5.
admin@Xorplus# set vlans vlan-id 5 private-vlan association 2-3
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.