set protocols ovsdb controller <controller-name> address

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

User can configure ovsdb vtep to establish an active OVSDB tcp/ssl connection to a controller .

Command Syntax
set protocols ovsdb controller <controller-name> address <ip-addr>

delete protocols ovsdb controller <controller-name> address

Parameter

  • <controller-name>  controller name.
  • <ip-address>  Specifies the destination IPv4/IPv6 address for the tcp/ssl connection.

Example
• This example demonstrates how to configure a tcp/ssl connection to port 6632 at 10.10.50.220.

admin@XorPlus# set protocols ovsdb controller c1 address 10.10.50.220
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.