syslog monitor

The syslog monitor command configures whether to enable or disable the syslog monitor function.

Command Syntax

syslog monitor <on | off>

Parameter

Parameter

Description

on | off

Enable or disable the syslog monitor function. The value could be on or off.

on: enables the syslog monitor function.
off: disables the syslog monitor function.

The default value is off.

Usage Guidelines

By configuring the syslog monitor function, you can view system log information on the user terminal (including host from which you log in to the device through the console interface) to monitor the running status of the device.

NOTE:

You can configure this command either in Linux shell or CLI mode as shown below:

From the ">" prompt, use the following format,

admin@Xorplus> syslog monitor on

From the "#" prompt, use the following format,

admin@Xorplus# run syslog monitor on

Example

Enable the syslog monitor function.

admin@Xorplus> syslog monitor on

Disable the syslog monitor function.

admin@Xorplus> syslog monitor off