set protocols dot1x interface auth-mode 802.1x
- Tracy Yang (Unlicensed)
The set protocols dot1x interface auth-mode 802.1x command enables the 802.1X authentication mode on a specified interface.
Command Syntax
set protocols dot1x interface <interface-name> auth-mode 802.1x
Parameter
Parameter | Description |
interface <interface-name> | Specifies the physical interface name. The value could be ge-1/1/1, xe-1/1/2, and so on. |
Usage Guidelines
When no NAC authentication mode and the CLI command set protocols dot1x interface <interface-name> are configured, the port is open to the user; but if the CLI command set protocols dot1x interface <interface-name> is configured, the port becomes blocked.
802.1X authentication is an authentication method that controls the network access rights of users based on ports together with the MAC address of client. The Extensible Authentication Protocol (EAP) packet is used to exchange authentication information between the supplicant, authenticator and authentication server. This technology is mainly used in networks with high security requirements. 802.1X authentication requires 802.1X client software to be installed on the supplicant.
Example
- Â Enable 802.1X authentication mode on interface ge-1/1/1.
admin@Xorplus# set protocols dot1x interface ge-1/1/1 auth-mode 802.1x admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.