run show dot1x all

The run show dot1x all command displays the NAC information.

Command Syntax

run show dot1x all

Parameter

None.

Example

Run run show dot1x all command to view the NAC information.

admin@Xorplus# run show dot1x all
Global-Info:
---------------------------------------------------------------------------------
NAS-IP              :  10.10.1.1
Block-VLAN         :  2
Block-VLAN-IP       :  172.16.1.1/24
WEB-AUTH-MODE   :  Remote
Server-Fail-VLAN           :  100
---------------------------------------------------------------------------------

Table 1 Description of the run show dot1x all command output

Item	Description
NAS-IP	Indicates the NAS IP address which is set to the L3 VLAN interface IP connected to the RADIUS server.
Block-VLAN	Indicates the VLAN ID for block VLAN.
Block-VLAN-IP	Indicates the IP address of the L3 block VLAN interface.
WEB-AUTH-MODE	Indicates the Web authentication mode, the value is Remote.
Server-Fail-VLAN	Indicates the VLAN to which the user ports will be added to when all the configured RADIUS servers are unreachable.