set protocols dot1x server-fail-vlan-id

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

The set protocols dot1x server-fail-vlan-id command configures a server fail VLAN.


Command Syntax

set protocols dot1x server-fail-vlan-id <vlan-id>


Parameter

Parameter

Description

server-fail-vlan-id <vlan-id>

Specifies the VLAN ID for a server fail VLAN. The value is an integer that ranges from 2 to 4094.


Example

  • Configure the server fail VLAN ID to 200.
admin@Xorplus# set protocols dot1x server-fail-vlan-id 200
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.