set system aaa tacacs-plus server-ip
The set system aaa tacacs-plus server-ip command configures IP address of a TACACS+ server.
Command Syntax
set system aaa tacacs-plus server-ip <ipv4_address>
Parameter
Parameter | Description |
server-ip <ipv4_address> | Specifies IP address of a TACACS+ server. The value is in dotted decimal notation. |
Usage Guidelines
PicOS supports a maximum of eight TACACS+ servers. When multiple TACACS+ servers are configured, only one will be used, the IP addresses are used in alphabetical order.
For example, the following TACACS+ servers are configured.
set system aaa tacacs-plus server-ip 146.13.191.77 set system aaa tacacs-plus server-ip 146.13.191.78 set system aaa tacacs-plus server-ip 1.1.1.1 set system aaa tacacs-plus server-ip 2.2.2.2 set system aaa tacacs-plus server-ip 3.3.3.3
The servers will be used in below order.
|
Example
• Configure IP address of a TACACS+ server.
admin@XorPlus# set system aaa tacacs-plus server-ip 10.10.53.53 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.