set system inband routed-interface

The set system inband routed-interface command sets a specified routed interface or sub-interface in the default VRF as the inband management port.

Command Syntax

set system inband routed-interface <routed-interface>

Parameter

Parameter	Description
routed-interface <routed-interface>	Enables inband management on a specfied routed interface or sub-interface in the default VRF. The value is a string.

Usage Guidelines

By default, the user cannot remotely log in and manage the switch through the routed interface or sub-interface.

Use this command to set a specified routed interface or sub-interface in the default VRF as the inband management port. The routed interface or sub-interface with the inband management function enabled can transmit both management traffic and data plane traffic.

NOTE:

Only the routed interface or sub-interface in the default VRF can be set as the inband management port. If a routed interface or sub-interface has been set as an inband management port, it cannot be bound to other user-defined VRFs.

Example

Enable the inband management function of the routed interface.

admin@Xorplus# set system inband routed-interface rif-te1
admin@Xorplus# commit