set protocols pim interface hello interval
- Tracy Yang
The set protocols pim interface hello interval command configures the PIM Hello messages period (in seconds) per interface.
Command Syntax
set protocols pim interface <interface-name> hello interval <interval>
Parameter
Parameter | Description |
interface <interface-name> | Specifies an L3 interface. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.The value is a string. |
hello interval <interval> | Specifies the interval for sending Hello messages. The value is an integer that ranges from 1 to 180, in seconds. |
Usage Guidelines
PIM devices periodically send Hello messages to maintain PIM neighbor relationships. You can run the this command to set the interval for sending Hello messages. The neighbor holdtime is 3.5 * hello-period.
Â
Example
- Set the interval for sending Hello messages to 40 seconds on vlan-2.
admin@Xorplus# set protocols pim interface vlan-2 hello interval 40 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.