set protocols pim ssm prefix-list

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols pim ssm prefix-list command sets a range of group addresses via a prefix-list that forces pim to never do SM over.


Command Syntax

set protocols pim [vrf<vrf-name>] ssm prefix-list <prefix-list>


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

prefix-list <prefix-list>

Specifies the prefix-list name. The value is a string which has been set by comannd set routing prefix-list.


Example

  • Configure a range of group addresses via a prefix-list.
admin@Xorplus# set protocols pim ssm prefix-list PreLst1
admin@Xorplus# set routing prefix-list ipv4-family PreLst1 permit prefix 233.0.0.0/8
admin@Xorplus# set routing prefix-list ipv4-family PreLst1 permit prefix 232.0.0.0/8
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.