set protocols spanning-tree pvst interface manual-forwarding
The set protocols spanning-tree pvst interface manual-forwarding command manually configures a physical port or a LAG port as a forwarding port for Rapid-PVST+ mode.
Command Syntax
set protocols spanning-tree pvst interface <interface-name> manual-forwarding <true | false>
Parameter
Parameter | Description |
interface <interface-name> | Specifies a port name. The value is a string that can be set to a physical port name or a LAG port. |
manual-forwarding <true | false> | Manually configure a physical port or a LAG port as a forwarding port. The value could be true or false.
By default, manual forwarding is disabled. |
Usage Guidelines
After manually configuring a physical port or a LAG port as a forwarding port, the state of the port is always forwarding, unless the port is down. The port does not participate in spanning tree calculation and does not send and receive BPDUs.
Example
- Configure the port ge-1/1/1 as a forwarding port manually for Rapid-PVST+ mode.
admin@Xorplus# set protocols spanning-tree pvst interface ge-1/1/1 manual-forwarding true admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.