set protocols spanning-tree stp interface edge

The set protocols spanning-tree stp interface edge command configures a physical port or a LAG port as an edge port for STP mode.

Command Syntax

set protocols spanning-tree stp interface <interface-name> edge <true | false>

Parameter

Parameter

Description

interface <interface-name>

Specifies a port name. The value is a string that can be set to a physical port name or a LAG port.

edge <true | false>

Enables or disables edge on a port. The value could be true or false.

true: enables a physical or a LAG port as an edge port.
false: disables a physical or a LAG port as an edge port.

By default, edge port is disabled.

Usage Guidelines

The edge port does not participate in the spanning tree calculation. However, once the edge port receives a configuration BPDU, the switching device automatically sets the edge port to a non-edge port and performs spanning tree calculation again.

Example

Configure the port ge-1/1/1 as an edge port.

admin@Xorplus# set protocols spanning-tree stp interface ge-1/1/1 edge true
admin@Xorplus# commit