set l3-interface tunnel tunnel-mode gre-ip

Run the command set l3-interface tunnel tunnel-mode gre-ip to configure the tunnel mode. Currently only GRE tunnel type is supported by PICOS.

To delete this configuration, run the command delete l3-interface tunnel tnl4 tunnel-mode gre-ip. 

Command Syntax

set l3-interface tunnel <tunnel-name> tunnel-mode gre-ip

delete l3-interface tunnel <tunnel-name> tunnel-mode gre-ip

Parameter

Example

•  Set the tunnel mode of tunnel tnl4 to gre-ip.

admin@XorPlus# set l3-interface tunnel tnl4 tunnel-mode gre-ip
admin@Xorplus# commit