set protocols erps ring instance control-vlan

The set protocols erps ring instance control-vlan command adds a control VLAN to a ring instance.

The delete protocols erps ring instance control-vlan command deletes the configuration.

Command Syntax

set protocols erps ring <ring-id> instance <instance-id> control-vlan <control-vlan>

delete protocols erps ring <ring-id> instance <instance-id> control-vlan

Parameters

Parameter	Description
ring <ring-id>	Specifies the ID of the ring. The value is an integer that ranges from 1 to 8.
instance <instance-id>	Specifies the instance ID for a ring. The value is an integer that ranges from 1 to 2.
control-vlan <control-vlan>	Specifies the control VLAN ID for a ring instance. The value is an integer that ranges from 1 to 4094.

Usage Guidelines

In an ERPS ring, the control VLAN is used to transmit ERPS protocol packets.

Each ERPS ring instance must be configured with a control VLAN.
Different ERPS ring instances cannot use the same control VLAN.
The same control VLAN must be configured for all devices in the same ERPS ring instance.

Example

admin@PICOS# set protocols erps ring 5 instance 2 control-vlan 100
admin@PICOS# commit