set protocols erps ring port1 interface

The set protocols erps ring port1 interface command configures port1 of an ERPS ring. An L2 interface in the switch is associated to one of the two member ports (port0 and port1) of an ERPS ring. No more than two ports per node can join the same ERPS ring, which are named ERPS port0 and port1.

The delete protocols erps ring port1 interface command deletes the configuration.

Command Syntax

set protocols erps ring <ring-id> port1 interface <interface-name>

delete protocols erps ring <ring-id> port1 interface

Parameters

Parameter	Description
ring <ring-id>	Specifies the ID of the ring. The value is an integer that ranges from 1 to 8.
interface <interface-name>	Specifies port1 interface name of ERPS ring. The value is a physical port.

Example

Configure port1 of an ERPS ring.

admin@PICOS# set protocols erps ring 5 port1 interface ge-1/1/2
admin@PICOS# commit