set protocols snmp trap-group vrf mgmt-vrf

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols snmp trap-group vrf mgmt-vrf command configures to run the SNMP Trap service in the management VRF.


Command Syntax

set protocols snmp trap-group vrf mgmt-vrf


Parameter

None.


Usage Guidelines

SNMP Trap management service runs in the default VRF by default, and supports to be configured in the management VRF. The corresponding Network Management System (NMS) is required to be route reachable in the VRF running SNMP Trap management service.

Note: The latest configuration overrides the previous one.


Example

  • Configure the SNMP Trap service to run in the management VRF.
admin@Xorplus# set protocols snmp trap-group vrf mgmt-vrf
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.