set protocols snmp trap-group vrf mgmt-vrf
The set protocols snmp trap-group vrf mgmt-vrf command configures to run the SNMP Trap service in the management VRF.
Command Syntax
set protocols snmp trap-group vrf mgmt-vrf
Parameter
None.
Usage Guidelines
SNMP Trap management service runs in the default VRF by default, and supports to be configured in the management VRF. The corresponding Network Management System (NMS) is required to be route reachable in the VRF running SNMP Trap management service.
Note: The latest configuration overrides the previous one.
Example
- Configure the SNMP Trap service to run in the management VRF.
admin@Xorplus# set protocols snmp trap-group vrf mgmt-vrf admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.