set l3-interface vlan-interface address prefix-length

To configure an IPv4 or IPv6 address for an L3 interface, use the set l3-interface vlan-interface address prefix-length command in L2/L3 configuration mode. To remove an L3 interface, use the delete form of the command.

Command Syntax

set l3-interface vlan-interface <interface-name> address <address> prefix-length <number>
delete l3-interface vlan-interface <interface-name>

Parameters

Parameter	Description
vlan-interface <interface-name>	Interface name.
address	IPv4 or IPv6 address.
number	The network prefix length. The range is 4-32 for IPv4 addresses, and 1-128 for IPv6 addresses.

Example

The following example configures the IPv4 address for the vlan10 L3 interface and then removes the L3 interface:

admin@Switch# set l3-interface vlan-interface vlan10 address 192.168.1.1 prefix-length 24
admin@Switch# commit
admin@Switch# delete l3-interface vlan-interface vlan10

The following example configures the IPv6 address for the vlan20 L3 interface and then removes the L3 interface:

admin@Switch# set l3-interface vlan-interface vlan20 address 2001:1:1::1 prefix-length 64
admin@Switch# commit
admin@Switch# delete l3-interface vlan-interface vlan20