run show l3-interface vlan-interface
- Tracy Yang
Owned by Tracy Yang
Nov 13, 2023
2 min read
Loading data...
To display information about an L3 VLAN interface, use the run show l3-interface vlan-interface command in L2/L3 configuration mode.
Command Syntax
run show l3-interface vlan-interface <interface-name> [detail]
Parameters
| Parameter | Description |
| interface-name | Optional. The VLAN interface name. |
| detail | Optional. Show detail informations of all VLAN interface. |
Example
- The following example displays information about vlan10:
admin@Switch# run show l3-interface vlan-interface vlan10
vlan10 Hwaddr E0:07:1B:C9:20:9B, Vlan:10, MTU: 1450, State:UP
Inet addr: 10.1.1.166/24
fe80::e207:1b20:1c9:209b/64
Traffic statistics:
5 sec input rate IPv4 0 packets/sec, IPv6 0 packets/sec
5 sec forwarding rate IPv4 0 packets/sec, IPv6 0 packets/sec
IPv4 Input Packets............................0
IPv4 Forwarding Packets.......................0
IPv6 Input Packets............................0
IPv6 Forwarding Packets.......................0
- The following example displays the detail information about vlan10:
admin@Switch# run show l3-interface vlan-interface vlan10 detail
vlan10 Hwaddr E0:07:1B:C9:20:9B, Vlan:10, MTU: 1450, State:UP
Inet addr: 10.1.1.166/24
fe80::e207:1b20:1c9:209b/64
Traffic statistics:
5 sec input rate IPv4 0 packets/sec, IPv6 0 packets/sec
5 sec forwarding rate IPv4 0 packets/sec, IPv6 0 packets/sec
IPv4 Input Packets............................0
IPv4 Forwarding Packets.......................0
IPv6 Input Packets............................0
IPv6 Forwarding Packets.......................0
Port State Tag
---------- ------------ --------
te-1/1/1 FORWARDING tagged
te-1/1/17 DOWN tagged
te-1/1/2 FORWARDING tagged
Copyright © 2024 Pica8 Inc. All Rights Reserved.