run show l3-interface routed-interface
The run show routed interface command shows the detailed layer 3 interface information of a specific routed interface or sub-interface.
Command Syntax
run show l3-interface routed-interface <interface-name>
Parameter
Parameter | Description |
routed-interface <interface-name> | Specifies a routed interface name or sub-interface name. The value is a string. |
Example
- View the detailed layer 3 information of a specific routed interface.
admin@Xorplus# run show l3-interface routed-interface rif-te1 rif-te1 Hwaddr 18:5A:58:1F:63:A1, Vlan:800, MTU: 1500, State:UP Inet addr: 120:1:1::49/64 fe80::1a5a:5820:131f:63a1/64 Traffic statistics: 5 sec input rate IPv4 0 packets/sec, IPv6 0 packets/sec 5 sec forwarding rate IPv4 0 packets/sec, IPv6 0 packets/sec IPv4 Input Packets............................0 IPv4 Forwarding Packets.......................0 IPv6 Input Packets............................0 IPv6 Forwarding Packets.......................0
Copyright © 2024 Pica8 Inc. All Rights Reserved.