run show bgp neighbor
The run show bgp neighbor command displays information about BGP peers.
Command Syntax
run show bgp neighbor [<ip> [advertised-routes | received-routes | routes]]
Parameter
Parameter | Description |
<ip> | Optional. Specifies the IP address of a peer. If not specified, it will display information of all the BGP peers. |
[advertised-routes | received-routes | routes] | Optional.
|
Example
• View the information about all the BGP peers.
admin@Xorplus# run show bgp neighbor BGP neighbor on vlan20: 192.168.20.1, remote AS 100, local AS 200, external link BGP version 4, remote router ID 1.1.1.1, local router ID 2.2.2.2 BGP state = Idle Last read 00:15:06, Last write never Hold time is 180, keepalive interval is 60 seconds Graceful restart information: Local GR Mode: Helper* Remote GR Mode: NotApplicable R bit: False Timers: Configured Restart Time(sec): 120 Received Restart Time(sec): 0 Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 0 0 Notifications: 0 0 Updates: 0 0 Keepalives: 0 0 Route Refresh: 0 0 Capability: 0 0 Total: 0 0 Minimum time between advertisement runs is 0 seconds For address family: IPv4 Unicast Not part of any update group Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 0; dropped 0 Last reset 00:15:06, Waiting for Peer IPv6 LLA BGP Connect Retry Timer in Seconds: 120 Read thread: off Write thread: off FD used: -1 BGP neighbor is 192.168.30.2, remote AS 200, local AS 200, internal link Administratively shut down BGP version 4, remote router ID 3.3.3.3, local router ID 2.2.2.2 BGP state = Idle Last read 00:15:06, Last write never Hold time is 180, keepalive interval is 60 seconds Graceful restart information: Local GR Mode: Helper* Remote GR Mode: NotApplicable R bit: False Timers: Configured Restart Time(sec): 120 Received Restart Time(sec): 0 Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 0 0 Notifications: 0 0 Updates: 0 0 Keepalives: 0 0 Route Refresh: 0 0 Capability: 0 0 Total: 0 0 Minimum time between advertisement runs is 600 seconds For address family: IPv4 Unicast Not part of any update group Advertise bestpath per AS via addpath Override ASNs in outbound updates if aspath equals remote-as Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 0; dropped 0 Last reset 00:15:06, No AFI/SAFI activated for peer External BGP neighbor may be up to 255 hops away. BGP Connect Retry Timer in Seconds: 111 Peer Authentication Enabled Read thread: off Write thread: off FD used: -1 BGP neighbor is 192.168.40.2, remote AS 200, local AS 200, internal link BGP version 4, remote router ID 4.4.4.4, local router ID 2.2.2.2 BGP state = Active Last read 00:15:06, Last write never Hold time is 180, keepalive interval is 60 seconds Graceful restart information: Local GR Mode: Helper* Remote GR Mode: NotApplicable R bit: False Timers: Configured Restart Time(sec): 120 Received Restart Time(sec): 0 Message statistics: Inq depth is 0 Outq depth is 0 Sent Rcvd Opens: 0 0 Notifications: 0 0 Updates: 0 0 Keepalives: 0 0 Route Refresh: 0 0 Capability: 0 0 Total: 0 0 Minimum time between advertisement runs is 0 seconds For address family: IPv4 Unicast Not part of any update group Advertise bestpath per AS via addpath Override ASNs in outbound updates if aspath equals remote-as Community attribute sent to this neighbor(all) 0 accepted prefixes Connections established 0; dropped 0 Last reset 00:15:06, No AFI/SAFI activated for peer External BGP neighbor may be up to 255 hops away. BGP Connect Retry Timer in Seconds: 111 Peer Authentication Enabled Read thread: off Write thread: off FD used: -1
Copyright © 2024 Pica8 Inc. All Rights Reserved.