set protocols bgp neighbor activate

The set protocols bgp neighbor activate command enables the address-family capability and exchange of information specific to an address family with a BGP neighbor.
The delete protocols bgp neighbor activate command removes the address-family capability and disables the exchange of routes for the specified address-family with the BGP neighbor.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} activate <true | false>

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} activate

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
{ipv4-unicast\|ipv4-labeled-unicast\|ipv6-unicast\|ipv6-labeled-unicast}	Specifies the type of the address family.
neighbor <ip>	Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.
<true \| false>	Enables or disables the address-family capability. The value could be true or false. true: enables the address-family capability. false: disables the address-family capability.

Example
• This example enables the address-family capability and exchange of information specific to an address family with a BGP neighbor.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast activate true
admin@XorPlus# commit