set routing route-map match ipv4-addr address


The set routing route-map match ipv4-addr address command  matches the destination IP address prefix length or the prefix list of the routes.
The delete routing route-map match ipv4-addr address command restores the default behavior of not matching the destination IP address prefix length or the prefix list of the routes.

Command Syntax

set routing route-map <route-map-name> order <NUMBERmatch ipv4-addr address {prefix-len <prefix-len>|prefix-list <prefix-list-v4>}

delete routing route-map <route-map-name> order <NUMBER> match ipv4-addr address {prefix-len <prefix-len>|prefix-list <prefix-list-v4>}


Parameter

Parameter

Description

route-map <route-map-name>

Specifies the name of the route map. Required.

order <NUMBER>

Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.

prefix-len <prefix-len>Specifies the prefix length to be matched. The value is an integer that ranges from 0 to 32.
prefix-list <prefix-list-v4>Specifies the name of the prefix list to be matched.


Example

  •  Configure a match clause in the route map to match the address prefix length of the routes.
admin@Xorplus# set routing route-map GlobalMap order 10 match ipv4-addr address prefix-len 24
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.