set routing route-map match ipv4-addr next-hop
The set routing route-map match ipv4-addrnext-hop command matches the next-hop address prefix length or prefix list of the routes.
The delete routing route-map match ipv4-addr next-hop command restores the default behavior of not matching the next-hop address prefix length or prefix list of the routes.
Command Syntax
set routing route-map <route-map-name> order <NUMBER> match ipv4-addr next-hop {prefix-len <prefix-len>|prefix-list <prefix-list-v4>}
delete routing route-map <route-map-name> order <NUMBER> match ipv4-addr next-hop {prefix-len <prefix-len>|prefix-list <prefix-list-v4>}
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
order <NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
prefix-len <prefix-len> | Specifies the prefix length to be matched. The value is an integer that ranges from 0 to 32. |
prefix-list <prefix-list-v4> | Specifies the name of the prefix list to be matched. |
Example
- Configure a match clause in the route map to match the next hop prefix length of the routes.
admin@Xorplus# set routing route-map GlobalMap order 10 match ipv4-addr next-hop prefix-len 24 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.