set protocols lldp snmp-trap

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set protocols lldp snmp-trap command is used to enable or disable the SNMP trap for LLDP function.


Command Syntax

set protocols lldp snmp-trap <true | false>


Parameter

Parameter

Description

snmp-trap <true | false>

Enable or disable the SNMP trap for LLDP function. The value could be true or false.

  • true: Enable the SNMP trap for LLDP function, the system can send LLDP trap message to NMS.
  • false: Disable the SNMP trap for LLDP function, then there will be no more LLDP trap message sends to NMS.

The default value is true.


Example

  •   Disable the SNMP trap for LLDP function. 
admin@Xorplus# set protocols lldp snmp-trap false
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.