set protocols snmp community clients
The set protocols snmp community clients command configures the an SNMP client.
Command Syntax
set protocols snmp community <community-name> clients <IP_address>
delete protocols snmp community <community-name> clients <IP_address>
Parameter
Parameter | Description |
community <community-name> | Specifies the name of a community. The value is a string. |
clients <IP_address> | Specifies the IPv4 address of the SNMP client. |
Example
 •This example configures the an SNMP client.
admin@XorPlus# set protocols snmp community comm1 clients 10.10.10.1 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.