set protocols snmp trap-group event cpu-threshold low

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set protocols snmp trap-group event cpu-threshold low command configures sets the low threshold for CPU usage monitoring to send SNMP Trap messages.


Command Syntax

set protocols snmp trap-group event cpu-threshold low <low-value>


Parameter

Parameter

Description

low <low-value>

Specifies the low threshold for CPU usage monitoring. The value is an integer that ranges from 1 to 100, indicating 1% to 100%.

The default value is 20.


Usage Guidelines

When CPU usage falls below the low threshold for a continuous time period, the system logs the event and sends an SNMP Trap message. By viewing log information, you can effectively monitor CPU usage.


Example

  •   Set the low threshold for CPU usage to 20%.
admin@Xorplus# set protocols snmp trap-group event cpu-threshold low 20
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.