run show igmp-snooping
The run show igmp-snooping command shows the configuration information of IGMP snooping.
Command Syntax
run show igmp-snooping [vlan <vlan-id>]
Parameter
Parameter | Description |
vlan <vlan-id> | Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094. |
Example
- Show the configuration information of IGMP snooping.
admin@XorPlus# run show igmp-snooping Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping : Enabled Report suppression : Enabled Robustness variable : 2 Router aging time : 260 Max response time : 10 Query interval : 60 Last member query count : 2 Last member query interval : 2
- Show the IGMP snooping configuration of a specific VLAN.
admin@XorPlus# run show igmp-snooping vlan 1 Vlan 1: ---------------------------------------------- IGMP snooping : Enabled IGMPv2 fast leave : Enabled IGMP querier state : Enabled IGMP querier source ip address : 0.0.0.0 IGMP other querier timer : 1 IGMP querier version : 2
Copyright © 2024 Pica8 Inc. All Rights Reserved.