run show igmp-snooping groups

Owned by Tracy Yang
Nov 28, 2023

The run show igmp-snooping groups command shows information about multicast group member ports which is used for Layer 2 forwarding, namely, the Layer 2 forwarding table.


Command Syntax

run show igmp-snooping groups [vlan <vlan-id>]


Parameter

Parameter

Description

vlan <vlan-id>

Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.


Example

  •   Show the information about multicast group member ports.      
admin@XorPlus# run show igmp-snooping groups
Vlan      Group                    Port List          Type
--------  ------------------   -----------------   ----------------------
1         238.255.0.1              ge-1/1/2           Static               
                                   ge-1/1/1           Mrouter  

Copyright © 2024 Pica8 Inc. All Rights Reserved.