set protocols igmp-snooping vlan-id mrouter interface


The set protocols igmp-snooping vlan-id mrouter interface command configures the interface as a static router port in the specified VLAN.


Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> mrouter interface <interface-name>


Parameter

Parameter

Description

vlan-id <vlan-id>

Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

interface <interface-name>

Specifies the interface of the switch as a static router port.


Usage Guidelines

If you need to forward IGMP report / leave packets from one interface to the upstream IGMP querier permanently and stably, you can configure the interface as a static router port. Static router port will not be affected by the aging time, it will not age.


Example

  •   Configure the interface as a static router port in the specified VLAN.
admin@Xorplus# set protocols igmp-snooping vlan-id 2 mrouter interface ge-1/1/3
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.