set protocols igmp-snooping vlan-id querier other-querier-timer

The set protocols igmp-snooping vlan-id querier other-querier-timer command configures the IGMP snooping querier other-querier-timer.

Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> querier other-querier-timer <other-querier-timer>

Parameter

Parameter

Description

vlan-id <vlan-id>

Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

other-querier-timer <other-querier-timer>

Specifies the IGMP snooping querier other-querier-timer. The value is an integer, in seconds, that ranges from 1 to 1000.

The default value is 120.

Usage Guidelines

You can enable IGMP snooping querier function on the Layer 2 device to send IGMP query messages to take the querier role similar to Layer 3 multicast devices. If the Layer 2 querier receives an IGMP general query message sent by the upstream Layer 3 querier device, it will forward the IGMP general query message to all ports excluding the port receiving the messages of the VLAN. The IGMP snooping general query packets originally produced and planned to be sent by the Layer 2 querier devices are delayed and will be sent after the time of other-querier-timer.

Example

Configure the IGMP snooping querier other-querier-timer.

admin@XorPlus# set protocols igmp-snooping vlan-id 2 querier other-querier-timer 12 
admin@XorPlus# commit