set protocols dot1x block-vlan-id

Owned by Tracy Yang
May 24, 2024
1 min read

The set protocols dot1x block-vlan-id command configures block VLAN ID.


Command Syntax

set protocols dot1x block-vlan-id <vlan-id>


Parameter

Parameter

Description

block-vlan-id <vlan-id>

Specifies the VLAN ID for block VLAN. The value is an integer that ranges from 2 to 4094.


Example

  • Configure the block VLAN ID to 100.
admin@Xorplus# set protocols dot1x block-vlan-id 100
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.