set protocols dot1x server-fail-vlan-id
The set protocols dot1x server-fail-vlan-id command configures a server fail VLAN.
Command Syntax
set protocols dot1x server-fail-vlan-id <vlan-id>
Parameter
Parameter | Description |
server-fail-vlan-id <vlan-id> | Specifies the VLAN ID for a server fail VLAN. The value is an integer that ranges from 2 to 4094. |
Example
- Configure the server fail VLAN ID to 200.
admin@Xorplus# set protocols dot1x server-fail-vlan-id 200 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.