run show rmon alarms

The run show rmon alarms command is used to view RMON alarms information.

Command Syntax

run show rmon alarms [<entry-index>]

Parameter

Parameter	Description
[<entry-index>]	Optional. Specifies the RMON alarms table index. The value is an integer that ranges from 1 to 65535.

Example

View RMON alarms information.

admin@PICOS# run show rmon alarms
Entry 1 is active, and owned by monitor
    Monitors 1.3.6.1.2.1.16.1.1.1.4.1 every 10 seconds
    Taking absolute samples, last value was 369804
    Rising threshold is 1000000000, assigned to event 1
    Falling threshold is 1000000000, assigned to event 1
    On startup enable rising or falling alarm

PICOS-4.4.4_Configuration_Guide (Special Release)

run show rmon alarms

Analytics

Related content