set protocols snmp rmon alarm variable

Owned by Tracy Yang
May 24, 2024
1 min read

The set protocols snmp rmon alarm variable command configures SNMP MIB OID of the RMON alarm monitoring object.

The delete protocols snmp rmon alarm command deletes the configuration. Users need to delete the RMON alarm entry to remove this configuration.


Command Syntax

set protocols snmp rmon alarm <entry-index> variable <oid-variable>

delete protocols snmp rmon alarm <entry-index>


Parameters

Parameter

Description

alarm <entry-index>

Specifies the RMON alarm table index. The value is an integer that ranges from 1 to 65535.

variable <oid-variable>

Specifies SNMP MIB OID of the RMON alarm. The value is a string.


Example

  • Configure a RMON alarm for OID of 1.3.6.1.2.1.16.1.1.1.4.1.
admin@PICOS# set protocols snmp rmon alarm 1 variable 1.3.6.1.2.1.16.1.1.1.4.1
admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.