run show pim interface
- Tracy Yang
Owned by Tracy Yang
May 24, 2024
Loading data...
The run show pim interface command shows information about all interfaces on which PIM-SM is enabled.
Command Syntax
run show pim interface [detail]
Example
- Show information about all interfaces on which PIM-SM is enabled.
admin@Xorplus# run show pim interface Interface State Address PIM Nbrs PIM DR FHR IfChannels ---------- -------- ------ -------- -------- ---- --------- loopback up 1.1.1.1 0 local 0 0 vlan100 up 10.0.0.11 1 10.0.0.21 0 4
Copyright © 2024 Pica8 Inc. All Rights Reserved.