set protocols igmp-snooping vlan-id mvr source group

Owned by Tracy Yang
May 24, 2024

The set protocols igmp-snooping vlan-id mvr source group command can be used to configure the source multicast group of a given MVLAN.

The delete protocols igmp-snooping vlan-id mvr source group command deletes the configuration.


Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> mvr source group <multicast-network-address>/<prefix-length>

delete protocols igmp-snooping vlan-id <vlan-id> mvr source group <multicast-network-address>/<prefix-length>


Parameters

Parameter

Description

<vlan-id>

The MVLAN ID of the MVR multicast traffic from upstream.

<multicast-network-address>

The multicast group address of the MVR mapping.

<prefix-length>The prefix length of the group address.


Usage Guidelines

Multiple source groups could be configured with one MVR VLAN instance.

Group overlapping is not allowed when configuring multiple MVLANs.


Example

  • Configure the multicast source group range 225.0.0.1/8 for the given MVLAN 100.
admin@PICOS# set protocols igmp-snooping vlan-id 100 mvr source group 225.0.0.1/8
admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.