The set protocols igmp-snooping vlan-id mvr source group command can be used to configure the source multicast group of a given MVLAN.

The delete protocols igmp-snooping vlan-id mvr source group command deletes the configuration.

Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> mvr source group <multicast-network-address>/<prefix-length>

delete protocols igmp-snooping vlan-id <vlan-id> mvr source group <multicast-network-address>/<prefix-length>

Parameters

Parameter	Description
<vlan-id>	The MVLAN ID of the MVR multicast traffic from upstream.
<multicast-network-address>	The multicast group address of the MVR mapping.
<prefix-length>	The prefix length of the group address.

Usage Guidelines

Multiple source groups could be configured with one MVR VLAN instance.

Group overlapping is not allowed when configuring multiple MVLANs.

Example

admin@PICOS# set protocols igmp-snooping vlan-id 100 mvr source group 225.0.0.1/8
admin@PICOS# commit

Browser not supported