run show spanning-tree pvst
The run show spanning-tree pvst command displays the configuration information and status of spanning tree protocol Rapid PVST+.
Command Syntax
run show spanning-tree pvst <bridge | interface> [all | vlan <vlan-id>]
Parameter
Parameter | Description |
<bridge | interface> | Indicates to show the spanning tree information based on bridge or interface. |
[all | vlan <vlan-id>] | The value could be all, vlan <vlan-id>.
Optional when showing the spanning tree information based on bridge. Required when showing the spanning tree information based on interface. |
Example
-  Run run show spanning-tree pvst command to view the configuration information and status of spanning tree protocol Rapid PVST+.
admin@PICOS# run show spanning-tree pvst interface all Rapid PVST+ Spanning Tree Interface Status for VLAN 1 Interface Port ID Designated Designated Bridge Path Cost State Role Port ID ID ---------- --------- ---------- ----------------------- --------- ---------- --------------- te-1/1/1 128.1 128.1 32768.3c:2c:30:10:20:83 800 FORWARDING ROOT admin@PICOS# run show spanning-tree pvst bridge -------------------------------------------------- Bridge Spanning Tree Parameters Enabled Protocol: PVST Root ID: 32768.3c:2c:30:10:20:83 Root Path Cost: 800 Designated Bridge ID: 32768.3c:2c:30:10:20:83 Root Port: te-1/1/1 Hello Time: 2 Maximum Age: 20 Forward Delay: 15 Number of Topology Changes: 1 Time Since Last Topology Change: 0 day 00:00:35 Local Parameters Bridge ID: 32769.8c:ea:1b:32:1f:58 Hello Time: 2 Maximum Age: 20 Forward Delay: 15
Copyright © 2024 Pica8 Inc. All Rights Reserved.