set protocols spanning-tree mstp configuration-name


The set protocols spanning-tree mstp configuration-name command configures the MST region name of the switching device.


Command Syntax

set protocols spanning-tree mstp configuration-name <configuration-name>


Parameter

Parameter

Description

configuration-name <configuration-name>

Specifies the MST region name. The value is a string.


Usage Guidelines

MST region name is used to distinguish MST regions. Two switching devices belong to the same MST region only when they have the following same configurations:

  • MST region name
  • Mappings between MSTIs and VLANs
  • MST region revision level


Example

  • Configure the MSTP bridge configuration name.
admin@Xorplus# set protocols spanning-tree mstp configuration-name mstp1
admin@Xorplus# commit


Copyright © 2024 Pica8 Inc. All Rights Reserved.