set protocols erps ring instance enable

The set protocols erps ring instance enable command can be used to enable or disable protection switching on the given instance of the ring. It is disabled by default.

The delete protocols erps ring instance enable command deletes the configuration.

Command Syntax

set protocols erps ring <ring-id> instance <instance-id> enable <true | false>

delete protocols erps ring <ring-id> instance <instance-id> enable

Parameters

Parameter	Description
ring <ring-id>	Specifies the ID of the ring. The value is an integer that ranges from 1 to 8.
instance <instance-id>	Specifies the instance ID for a ring. The value is an integer that ranges from 1 to 2.
enable <true \| false>	Enable or disable protection switching on the given instance of the ring. The value could be true or false. true: Enable protection switching on the given instance of the ring. false: Disable protection switching on the given instance of the ring. By default, ERPS ring instance is disabled.

Usage Guidelines

ERPS ring instance can be enabled by the command set protocols erps ring <ring-id> instance <instance-id> enable true, or by configuring other "set protocols erps ring <ring-id> instance <instance-id> xxx" commands in the ERPS CLI.

The command set protocols erps ring <ring-id> instance <instance-id> enable false can be used to disable ERPS ring instance on the device.

Example

Enable protection switching on the given instance of the ring.

admin@PICOS# set protocols erps ring 5 instance 2 enable true
admin@PICOS# commit