set protocols bgp table-map
The set protocols bgp table-map command is used to apply a route-map on route updates from BGP to Zebra. All the applicable match operations are allowed, such as match on prefix, next-hop, communities, etc. Set operations for this attach-point are limited to metric and next-hop only. Any operation of this feature does not affect BGPs internal RIB.
Supported for ipv4 and ipv6 address families. It works on multi-paths as well, however, metric setting is based on the best-path only.
The delete protocols bgp table-map command disables this feature.
Command Syntax
set protocol bgp [vrf <text>] {ipv4-unicast|ipv6-unicast} table-map <route-map-name>
delete protocol bgp [vrf <text>] {ipv4-unicast|ipv6-unicast} table-map <route-map-name>
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
{ipv4-unicast|ipv6-unicast} | Specifies the IP address family type. |
table-map <route-map-name> | Specifies the name of the route map. |
Example
• This example applies a route-map on route updates from BGP to Zebra.
admin@XorPlus# set protocols bgp ipv4-unicast table-map map1 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.