set protocols bgp neighbor prefix-list


The set protocols bgp neighbor prefix-list command configures an IPv4 or IPv6 prefix list to advertise or receive routes from peers.

The delete protocols  bgp neighbor prefix-list command disables this feature.


Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast{in|out} prefix-list <prefix-list>

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast{in|out} prefix-list <prefix-list>


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast}Specifies the type of the address family.
neighbor <ip>Specifies the IPv4 or IPv6 address of a peer.
peer-group <peer-group>Specifies a peer group.
interface <interface>Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.
 prefix-list <prefix-list>Specifies the IPv4 or IPv6 prefix list.
{in|out}

Sets the filter policy to apply to either the received routes from the neighbor (in) or the advertised routes to the neighbor (out).


Example
• This example configures an IPv4 prefix list to receive routes from peers.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast in prefix-list List1
admin@XorPlus# commit


Copyright © 2024 Pica8 Inc. All Rights Reserved.