set protocols bgp cluster-id

The set protocols bgp cluster-id command specifies the cluster ID when the BGP router is used as a route-reflector. The cluster ID default is the router ID. Any changes in BGP configuration are applied by restarting the current BGP sessions on the VRFs.

The delete protocols bgp cluster-idcommand sets the cluster ID to the default value, which is the router ID.

Command Syntax

set protocol bgp [vrf <vrf-name>] cluster-id <IPV4-ADDR>

delete protocol bgp [vrf <vrf-name>] cluster-id <IPV4-ADDR>

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
<IPV4-ADDR>	Specifies an IP address in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255. You can remove leading zeros. For example, the address 192.169.005.100 becomes 192.168.5.100.

Example
• This example specifies the cluster ID when the BGP router is used as a route-reflector.

admin@XorPlus# set protocols bgp cluster-id 2.2.2.2
admin@XorPlus# commit