set protocols bgp neighbor send-community
The set protocols bgp neighbor send-community command enables community and/or extended community exchange with the specified neighbor. When this command is configured for the peer-group, then all the neighbors that are part of peer-group will send the community values to the peers.
The delete protocols bgp neighbor send-community command will not allow the neighbor to send community values to the specific neighbors that are part of peer-group.
Command Syntax
set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} send-community type [both|extended|standard|large|all]
delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} send-community type [both|extended|standard|large|all]
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} | Specifies the type of the address family. |
neighbor <ip> | Specifies the IPv4/IPv6 address of a peer. |
peer-group <peer-group> | Specifies a peer group. |
interface <interface> | Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name. |
[both|extended|standard|large|all] | Optional. The parameters standard, large and extended send only the respective community numbers. all: both standard and extended communities will be sent to the neighbor. |
Example
• This example allows community values to be sent to a specific neighbor.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast send-community type both admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.