set protocols ospf area virtual-link retransmit-interval

Run the command set protocols ospf area virtual-link retransmit-interval to set the time between retransmitting lost link state advertisements for the OSPF virtual link.
The command delete protocols ospf area virtual-link retransmit-interval sets the time between retransmitting lost link state advertisements to the default of 5 seconds for the OSPF virtual link.

Command Syntax

set protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> retransmit-interval <INTERVAL>

delete protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> retransmit-interval

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPF instance.
area {<ipv4>\|<area-id>}	Specifies the OSPF area ID. The value could be IPv4 dotted decimal format or an integer that ranges from 0 to 4294967295.
virtual-link <ROUTER-ID>	Configures a virtual link with the specified router ID of the remote ABR.
retransmit-interval <INTERVAL>	Specifies the retransmit interval, in seconds. Range: 1 to 65535. Default: 5.

Example

Configure the OSPF retransmit interval for the OSPF virtual link.

admin@XorPlus# set protocols ospf area 1.1.1.1 virtual-link 100.0.1.1 retransmit-interval 30
admin@Xorplus# commit