set protocols static mroute

The set protocols static mroute command adds a static route entry to the Multicast RIB.

The delete protocols static mroute command removes the static route.

Command Syntax

set protocols static mroute <ipv4/prefixlen> {next-hop<nexthop-address> | next-hop-interface <interface-name>} [distance <distance>]

delete protocols static mroute <ipv4/prefixlen> {next-hop<nexthop-address> | next-hop-interface <interface-name>} [distance<distance>]

Parameter

Parameter	Description
mroute <ipv4/prefixlen>	Specifies the IPv4 address of a multicast source. The value is in dotted decimal notation. The value prefixlen is a decimal integer that ranges from 1 to 32.
next-hop<nexthop-address>	Specifies the next-hop address. The value is in dotted decimal notation.
next-hop-interface <interface-name>	Specifies the L3 interface as an outgoing interface. The value could be a VLAN interface, loopback interface, routed interface or sub-interface.
distance <distance>	Optional. Specifies the administrative distance of a static route. The value is an integer that ranges from 1 to 255.

Example
• This example creates a static route.

admin@XorPlus# set protocols static mroute 10.10.10.0/24 next-hop-interface vlan100
admin@XorPlus# commit