set protocols snmp v3 usm-user group

Owned by Tracy Yang
Jul 18, 2024
1 min read

If you add a user to an SNMP group, you have to configure the read-view, write-view or notify-view for the group.  Or NMS will have no authority (writing, reading, being notified ) operated on the user. 

The set protocols snmp v3 usm-user group command adds a user to an SNMP group.


Command Syntax
set protocols snmp v3 usm-user <user-name> group <group-name>

delete protocols snmp v3 usm-user <user-name> group


Parameter

Parameter

Description

usm-user <user-name>

Specifies the name of a user. The value is a string.

group <group-name>Specifies the name of the group to which a user belongs. The value is a string.

                    

Example

 •This example adds user1 to SNMP group1.

admin@XorPlus# set protocols snmp v3 usm-user user1 group group1 
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.