set protocols snmp v3 usm-user group

If you add a user to an SNMP group, you have to configure the read-view, write-view or notify-view for the group. Or NMS will have no authority (writing, reading, being notified ) operated on the user.

The set protocols snmp v3 usm-user group command adds a user to an SNMP group.

Command Syntax
set protocols snmp v3 usm-user <user-name> group <group-name>

delete protocols snmp v3 usm-user <user-name> group

Parameter

Parameter	Description
usm-user <user-name>	Specifies the name of a user. The value is a string.
group <group-name>	Specifies the name of the group to which a user belongs. The value is a string.

Example

•This example adds user1 to SNMP group1.

admin@XorPlus# set protocols snmp v3 usm-user user1 group group1 
admin@XorPlus# commit